Merge pull request 'espoon-cleanup-moveto-fargo3d' (#1) from espoon-cleanup-moveto-fargo3d into master
Reviewed-on: #1
This commit is contained in:
commit
63670123c9
|
|
@ -1,35 +0,0 @@
|
|||
# GitHub Copilot Instructions
|
||||
|
||||
**Never use the unicode multiplication symbol (×, U+00D7) in any documentation, code, or markdown.**
|
||||
|
||||
Always use a plain lowercase 'x' for dimensions and multiplication.
|
||||
|
||||
- WRONG: `25mm × 25mm × 25mm`
|
||||
- CORRECT: `25mm x 25mm x 25mm`
|
||||
|
||||
# Wiki Tagging Standards
|
||||
|
||||
All wiki pages should use YAML frontmatter for tagging.
|
||||
|
||||
## Challenge Tags
|
||||
All challenge pages must include the following tags:
|
||||
- `challenge`: Identifies the page as a challenge.
|
||||
- `challenge-NNN`: A unique sequential identifier.
|
||||
- `challenge-001`: October 2025
|
||||
- `challenge-002`: November 2025
|
||||
- `challenge-003`: December 2025
|
||||
- Increment for subsequent months.
|
||||
- `archive`: (Optional) Use this tag when the challenge is no longer active.
|
||||
|
||||
## Visibility Tags
|
||||
- `hidden`: Use this tag to prevent the page from being published to the fargo3d.com website.
|
||||
|
||||
## Example Front Matter
|
||||
|
||||
```yaml
|
||||
---
|
||||
tags:
|
||||
- challenge
|
||||
- challenge-002
|
||||
---
|
||||
```
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 3.0 MiB |
Binary file not shown.
|
Before Width: | Height: | Size: 52 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
File diff suppressed because it is too large
Load Diff
|
|
@ -1,76 +0,0 @@
|
|||
# HueForge 3D Fuel Filament Library
|
||||
|
||||
This folder contains the official 3D Fuel filament library for HueForge, providing accurate color and transmissivity data for 127+ 3D Fuel filaments.
|
||||
|
||||
## What's Included
|
||||
|
||||
- **3d-fuel.json** - Complete filament library with:
|
||||
- 127 filament entries from 3D Fuel and 3D Fuel Tough lines
|
||||
- Accurate hex color codes
|
||||
- Transmissivity values for realistic light simulation
|
||||
- Both PLA+ and PCTG material types
|
||||
- Unique UUIDs for proper filament identification
|
||||
|
||||
## Installation Video Guide
|
||||
|
||||
|
||||
|
||||
## Steps for Adding to Your HueForge
|
||||
|
||||
1. **Download the File**
|
||||
- Download the `3d-fuel.json` file from this folder
|
||||
|
||||
2. **Locate Your HueForge Installation**
|
||||
- Navigate to your HueForge application folder
|
||||
- Find the `Filaments` subfolder
|
||||
|
||||
3. **Navigate to Vendor Libraries**
|
||||
- Inside the `Filaments` folder, locate the `Vendor Libraries` subfolder
|
||||
- If it doesn't exist, create it
|
||||
|
||||
4. **Install the Library**
|
||||
- Copy the `3d-fuel.json` file into the `Vendor Libraries` folder
|
||||
- The complete path should look like:
|
||||
|
||||
```text
|
||||
[HueForge Install]/Filaments/Vendor Libraries/3d-fuel.json
|
||||
```
|
||||
|
||||
5. **Restart HueForge**
|
||||
- Close and reopen HueForge
|
||||
- The 3D Fuel brand should now appear in your filament selection
|
||||
|
||||
## Using the Filaments
|
||||
|
||||
Once installed, you'll see "3D-Fuel" and "3D-Fuel Tough" as available brands in HueForge's filament selector. Each filament includes:
|
||||
|
||||
- **Accurate Colors**: Real hex color codes from 3D Fuel's specifications
|
||||
- **Transmissivity Data**: For realistic light transmission in your models
|
||||
- **Material Types**: Properly categorized as PLA+ or PCTG
|
||||
- **Complete Range**: From opaques to transparents, metallics to fluorescents
|
||||
|
||||
## Filament Highlights
|
||||
|
||||
- **Transparent Options**: Clearly Natural, Transparent Ruby Red, Transparent Lime Green
|
||||
- **Metallics**: Gold, Silver, Copper variations
|
||||
- **Fluorescents**: High-visibility colors for standout prints
|
||||
- **Standard Colors**: Complete spectrum of everyday printing colors
|
||||
- **Specialty Colors**: LulzBot Green, Bitcoin Orange, and more
|
||||
|
||||
## Community Integration
|
||||
|
||||
This library was created for the 3D Print Meetup community to enhance HueForge projects with accurate 3D Fuel filament data. Perfect for:
|
||||
|
||||
- Multi-color lithophanes
|
||||
- Transparent art pieces
|
||||
- Color-accurate prototyping
|
||||
- Community challenge projects
|
||||
|
||||
## Support
|
||||
|
||||
For questions about this filament library or HueForge integration, contact the 3D Print Meetup organizers or visit our community resources.
|
||||
|
||||
---
|
||||
|
||||
*Last Updated: October 2025*
|
||||
*Source: 3D Fuel Official Shopify Database*
|
||||
|
|
@ -1,76 +0,0 @@
|
|||
# 3D Fuel November Meetup - Meeting Announcement
|
||||
|
||||
## Email Subject Line
|
||||
|
||||
Join Us November 12th: 3D Printing Meetup + HueForge Presentation + New Challenge
|
||||
|
||||
---
|
||||
|
||||
## Email Body / Reddit Post
|
||||
|
||||
Hey everyone!
|
||||
|
||||
Join us for the **November 3D Printing Meetup**. Please note: **This month's meeting is on Wednesday, November 12th at 6:00 PM** (not our usual 3rd Wednesday).
|
||||
|
||||
**Also note:** December's meetup will be on **Wednesday, December 10th** (also adjusted for the holidays).
|
||||
|
||||
### Meeting Agenda
|
||||
|
||||
**Time: 6:00 - 8:00 PM**
|
||||
|
||||
1. **Social Time & Networking** - Welcome and catching up
|
||||
2. **Industry News Update** - Latest 3D printing trends with John
|
||||
3. **Show & Tell & Challenge Judging** - October transparency challenge winners and community showcases
|
||||
4. **New November Challenge Announcement** - "Wait, This Was Printed? How Are There No Layer Lines?" - Can you achieve the smoothest surface finish possible?
|
||||
5. **Featured Presentation: Getting Started with HueForge** *(30 minutes)* - Presented by **Eric Spooner**
|
||||
6. **Closing Discussion** - Wrap-up and informal conversation
|
||||
|
||||
### Special Presentation: Getting Started with HueForge
|
||||
|
||||
Join us for a brief introduction to HueForge color mapping software! This presentation will cover:
|
||||
|
||||
- **Installing the 3D Fuel Filament Library** - Add our complete 127+ filament database to HueForge
|
||||
- **Photo-to-Print Workflow** - Working with a simple Black and White photo
|
||||
- **Slicer Setup & Integration**:
|
||||
- Configuring HueForge with **Bambu Studio** using modifiers vs Painting
|
||||
|
||||
Perfect for anyone looking to take their color and multi-material printing to the next level!
|
||||
|
||||
### What to Expect
|
||||
|
||||
- Network with local 3D printing enthusiasts
|
||||
- Showcase your latest prints
|
||||
- Learn about our new November challenge: achieving the smoothest layer-line-free prints
|
||||
- Learn color mapping techniques with HueForge
|
||||
- Ask questions from experienced makers
|
||||
|
||||
### Location & Details
|
||||
|
||||
**When:** Wednesday, November 12th, 2025 | 6:00 - 8:00 PM
|
||||
**Where:** 3D-Fuel 2222 7th Ave N Fargo, ND 58102
|
||||
|
||||
### Don't Miss Out
|
||||
|
||||
Whether you're a 3D printing beginner or experienced maker, we have something for everyone. Bring your questions, your latest prints, and your enthusiasm!
|
||||
|
||||
**See you there!**
|
||||
|
||||
---
|
||||
|
||||
## Social Media Quick Version (Twitter/X)
|
||||
|
||||
November meetup is THIS WEDNESDAY (Nov 12th) at 6 PM! New challenge: "Wait, This Was Printed? How Are There No Layer Lines?" Plus Eric Spooner presents HueForge basics - photo-to-print workflows, 3D Fuel filament library & slicer setup. Show & tell too! #3DPrinting #3DFuel
|
||||
|
||||
---
|
||||
|
||||
## Meeting Details Reference
|
||||
|
||||
| Detail | Information |
|
||||
|--------|-------------|
|
||||
| **Date** | Wednesday, November 12th, 2025 |
|
||||
| **Time** | 6:00 - 8:00 PM |
|
||||
| **Presentation Topic** | Getting Started with HueForge |
|
||||
| **Presenter** | Eric Spooner |
|
||||
| **Duration** | 30 minutes |
|
||||
| **Key Topics** | 3D Fuel Library Installation, B&W Photo Mapping, Bambu Studio/Orca Slicer Setup |
|
||||
| **Note** | Special date - not 3rd Wednesday |
|
||||
|
|
@ -1,97 +0,0 @@
|
|||
---
|
||||
gitea: none
|
||||
include_toc: true
|
||||
---
|
||||
|
||||
# 3D Print Meetup Challenges
|
||||
|
||||
Welcome to our monthly 3D printing challenges! Each month features a unique theme designed to test different aspects of 3D printing skills, from material handling to design innovation.
|
||||
|
||||
## Active Challenge
|
||||
|
||||
### October 2025: "Is it Glass or Clearly Natural?"
|
||||
|
||||
**Theme**: Transparency and clarity testing with 3D Fuel "Clearly Natural" filaments
|
||||
|
||||
**Key Details**:
|
||||
|
||||
- **Model**: 25mm diameter x 50mm height cylinder in vase mode
|
||||
- **Materials**: 3D Fuel "Clearly Natural" PCTG or PLA
|
||||
- **Focus**: Maximum transparency and print quality
|
||||
- **Submission Deadline**: October 28, 2025
|
||||
|
||||
**[View Full Challenge Details](./challenges/October-2025/readme.md)**
|
||||
|
||||
## Upcoming Challenge
|
||||
|
||||
### November 2025: "[Challenge Name TBD]"
|
||||
|
||||
**Status**: Planning in progress
|
||||
|
||||
**Expected Timeline**:
|
||||
|
||||
- **Announcement**: November meeting (November 12th, 2025)
|
||||
- **Submission Period**: TBD
|
||||
- **Judging**: TBD
|
||||
|
||||
**[View Challenge Placeholder](./challenges/November-2025/readme.md)**
|
||||
|
||||
## Challenge Archive
|
||||
|
||||
### 2025 Challenges
|
||||
|
||||
| Month | Challenge Name | Theme | Status |
|
||||
|-------|---------------|-------|--------|
|
||||
| October | "Is it Glass or Clearly Natural?" | Transparency & Clarity | **Active** |
|
||||
| November | [TBD] | [TBD] | Planning |
|
||||
| December | [TBD] | [TBD] | Future |
|
||||
|
||||
## How Challenges Work
|
||||
|
||||
### Challenge Structure
|
||||
|
||||
Each monthly challenge includes:
|
||||
|
||||
- **Specific theme** focusing on different 3D printing aspects
|
||||
- **Clear requirements** for models, materials, and techniques
|
||||
- **Multiple award categories** for different achievements
|
||||
- **Community judging** during show & tell sessions
|
||||
- **Documentation sharing** for learning and improvement
|
||||
|
||||
### Participation
|
||||
|
||||
- **Open to all skill levels** - beginners to experts welcome
|
||||
- **Bring your submission** to the monthly meetup
|
||||
- **Share your process** - settings, techniques, and lessons learned
|
||||
- **Vote on favorites** during community judging
|
||||
- **Learn from others** through shared experiences
|
||||
|
||||
### Awards & Recognition
|
||||
|
||||
Each challenge features multiple ways to win:
|
||||
|
||||
- **Technical excellence** awards for best execution
|
||||
- **Innovation** awards for creative approaches
|
||||
- **People's choice** awards from community voting
|
||||
- **Category-specific** awards based on challenge theme
|
||||
- **Social media features** for all participants
|
||||
|
||||
## Challenge Development
|
||||
|
||||
### Suggesting Challenges
|
||||
|
||||
Community members can suggest future challenge themes:
|
||||
|
||||
- **Submit ideas** during meetup discussions
|
||||
- **Discord voting** on proposed themes
|
||||
- **School partnership** input for educational value
|
||||
- **Skill development** focus areas
|
||||
|
||||
### Challenge Template
|
||||
|
||||
For organizers developing new challenges, see our **[Challenge Template](./challenges/readme.md)** which provides the standard structure and guidelines for creating engaging monthly competitions.
|
||||
|
||||
---
|
||||
|
||||
**Current Focus**: Join us for the October transparency challenge and help shape November's theme!
|
||||
|
||||
|
|
@ -1,100 +0,0 @@
|
|||
---
|
||||
gitea: none
|
||||
include_toc: true
|
||||
---
|
||||
|
||||
# December 2025 Challenge: [TITLE TBD]
|
||||
|
||||
## Challenge Overview
|
||||
|
||||
[Challenge description to be determined]
|
||||
|
||||
This challenge focuses on:
|
||||
|
||||
- [Key focus area 1]
|
||||
- [Key focus area 2]
|
||||
- [Key focus area 3]
|
||||
|
||||
## Challenge Rules
|
||||
|
||||
### Materials & Constraints
|
||||
|
||||
- **Filament**: 3D Fuel filament (type TBD)
|
||||
- **Additional Requirements**: [TBD]
|
||||
- **Estimated Filament Usage**: [TBD]
|
||||
- **Model Specification**:
|
||||
- **Dimensions**: [TBD]
|
||||
- **Special Requirements**: [TBD]
|
||||
|
||||
### Competition Categories
|
||||
|
||||
- [Category 1]: [Description]
|
||||
- [Category 2]: [Description]
|
||||
|
||||
### Judging Criteria
|
||||
|
||||
1. **[Criteria 1]** ([XX]%): [Description]
|
||||
2. **[Criteria 2]** ([XX]%): [Description]
|
||||
3. **[Criteria 3]** ([XX]%): [Description]
|
||||
|
||||
### Submission Requirements
|
||||
|
||||
- **Physical Model**: Bring your print to the January meetup for judging
|
||||
- **Documentation**: Include photos showing:
|
||||
- [Photo requirement 1]
|
||||
- [Photo requirement 2]
|
||||
- **Settings Documentation**: Share your settings:
|
||||
- [Setting 1]
|
||||
- [Setting 2]
|
||||
- **Process Notes**: Brief description of your approach
|
||||
|
||||
### Evaluation Process
|
||||
|
||||
- **Initial Verification**: [Verification requirements]
|
||||
- **Visual Inspection**: [Inspection criteria]
|
||||
- **Community Voting**: People's choice award
|
||||
|
||||
## Prizes & Recognition
|
||||
|
||||
### Awards
|
||||
|
||||
- **[Award Category 1]**: [Description]
|
||||
- **People's Choice Award**: Community favorite
|
||||
|
||||
### Documentation
|
||||
|
||||
- Winner photos for social media sharing
|
||||
- Settings profiles shared with community
|
||||
- Technique documentation for learning
|
||||
|
||||
## Timeline
|
||||
|
||||
- **Challenge Announcement**: December 10, 2025 (at December meetup)
|
||||
- **Submission Deadline**: January [TBD], 2026 (at January meetup)
|
||||
- **Judging Period**: January [TBD], 2026 (during January meetup)
|
||||
- **Winner Announcement**: January [TBD], 2026 (end of January meetup)
|
||||
|
||||
## Model Creation Instructions
|
||||
|
||||
### Creating the Model
|
||||
|
||||
[Instructions TBD]
|
||||
|
||||
### Slicer Configuration
|
||||
|
||||
[Configuration details TBD]
|
||||
|
||||
### Tips for Success
|
||||
|
||||
- [Tip 1]
|
||||
- [Tip 2]
|
||||
- [Tip 3]
|
||||
|
||||
### What NOT to Do
|
||||
|
||||
- [Don't do this]
|
||||
- [Don't do that]
|
||||
|
||||
---
|
||||
|
||||
**Challenge details will be announced at the December 10th meetup!**
|
||||
|
|
@ -1,174 +0,0 @@
|
|||
---
|
||||
gitea: none
|
||||
include_toc: true
|
||||
---
|
||||
|
||||
# November 2025 Challenge: "Wait, This Was Printed? How Are There No Layer Lines?"
|
||||
|
||||
## Challenge Overview
|
||||
|
||||
Can you achieve the smoothest, most layer-line-free surface finish possible? This challenge pushes your printer tuning, slicer settings, and material knowledge to the limit. The goal is simple but difficult: create a 25mm cube with 2 walls and no top that looks so smooth, people question whether it was actually 3D printed!
|
||||
|
||||
This challenge focuses on:
|
||||
|
||||
- Surface finish quality and smoothness
|
||||
- Proper printer calibration and tuning
|
||||
- Optimal slicer settings for layer adhesion
|
||||
- Material selection and temperature control
|
||||
- The art of making layer lines disappear
|
||||
|
||||
## Challenge Rules
|
||||
|
||||
### Materials & Constraints
|
||||
|
||||
- **Filament**: 3D Fuel filament (any type: PLA+, Pro PLA+, PCTG etc.)
|
||||
- **Nozzle Requirement**: Must use a 0.4mm nozzle (REQUIRED)
|
||||
- **Estimated Filament Usage**: Approximately 3 grams (for reference only)
|
||||
- **Model Specification**:
|
||||
- **Dimensions**: Exactly 25mm × 25mm × 25mm cube (REQUIRED)
|
||||
- **Wall Count**: Exactly 2 walls (no more, no less) (REQUIRED)
|
||||
- **Top Layers**: 0 (no top surface)
|
||||
- **Bottom Layers**: Standard (as needed for proper adhesion)
|
||||
- **Infill**: 0% (hollow interior)
|
||||
- **Print Mode**: Standard FDM/FFF printing (no resin printing)
|
||||
|
||||
### Competition Categories
|
||||
|
||||
- **Smoothest Surface**: Best overall surface finish with minimal visible layer lines straight off the printer
|
||||
- **No post-processing allowed** - cubes must be judged as-printed
|
||||
|
||||
### Judging Criteria
|
||||
|
||||
1. **Layer Line Visibility** (100%): The appearance and visibility of layer lines - less visible is better
|
||||
- All cubes must meet basic challenge requirements (25mm cube dimensions, exactly 2 walls, no post-processing)
|
||||
- Winner is determined solely by smoothness of surface and minimal layer line appearance
|
||||
- **Tiebreaker**: If two prints are too close to differentiate, the fastest print time wins
|
||||
|
||||
### Submission Requirements
|
||||
|
||||
- **Physical Model**: Bring your printed 25mm cube to the December meetup for judging
|
||||
- **Dimension Verification**: Must be exactly 25mm x 25mm x 25mm
|
||||
- **Wall Count Verification**: Must show exactly 2 walls when inspected
|
||||
- **Print Time**: Record and report your total print time (used as tiebreaker if needed)
|
||||
- **Documentation**: Include photos showing:
|
||||
- Close-up surface details
|
||||
- Overall cube appearance
|
||||
- Cross-section or wall thickness (optional)
|
||||
- **Settings Documentation**: Share your winning settings:
|
||||
- Layer height
|
||||
- Print temperature
|
||||
- Print speed
|
||||
- Cooling settings
|
||||
- Any special techniques used
|
||||
- **Process Notes**: Brief description of your approach
|
||||
|
||||
### Evaluation Process
|
||||
|
||||
- **Dimension & Wall Check**: Verification of 25mm cube dimensions and exactly 2 walls (must pass to be eligible)
|
||||
- **Visual Inspection**: Expert panel examines layer line visibility under good lighting
|
||||
- **Community Voting**: People's choice for most impressive result
|
||||
|
||||
## Prizes & Recognition
|
||||
|
||||
### Awards
|
||||
|
||||
- **Smoothest Surface Winner**: Best layer-line elimination straight off the printer
|
||||
- **People's Choice Award**: Community favorite
|
||||
|
||||
### Documentation
|
||||
|
||||
- Winner photos for social media sharing
|
||||
- Settings profiles shared with community
|
||||
- Technique documentation for learning
|
||||
|
||||
## Timeline
|
||||
|
||||
- **Challenge Announcement**: November 12, 2025 (at November meetup)
|
||||
- **Submission Deadline**: December 10, 2025 (at December meetup)
|
||||
- **Judging Period**: December 10, 2025 (during December meetup)
|
||||
- **Winner Announcement**: December 10, 2025 (end of December meetup)
|
||||
|
||||
## Model Creation Instructions
|
||||
|
||||
### Using the Provided Model
|
||||
|
||||
**Download the pre-configured cube:**
|
||||
|
||||
- **File Location**: [Challenge Files/November2025/Cube.3mf](../../Challenge%20Files/November2025/Cube.3mf)
|
||||
- **Pre-configured**: Already set to 25mm × 25mm × 25mm with 2 walls and no top
|
||||
- **Ready to slice**: Import into your slicer and adjust settings for your printer
|
||||
|
||||
### Creating the Cube Model from Scratch
|
||||
|
||||
#### Using Bambu Studio
|
||||
|
||||
**Step 1: Add Primitive**
|
||||
|
||||
1. Open Bambu Studio to a new project
|
||||
2. Right-click on the build plate
|
||||
3. Select "Add Primitive"
|
||||
4. Select "Cube"
|
||||
|
||||
|
||||
|
||||
**Step 2: Resize the Cube**
|
||||
|
||||
1. Click to resize the cube
|
||||
3. Set X to 25mm and Y and Z should also set to 25mm(If uniform scale cause issue you can uncheck)
|
||||
|
||||
|
||||
|
||||
#### Alternative Methods
|
||||
|
||||
- **Fusion 360**: Create square sketch (25mm × 25mm), extrude to 25mm height
|
||||
- **Tinkercad**: Use cube shape, adjust dimensions to 25mm × 25mm × 25mm
|
||||
- **FreeCAD**: Create cube with specified dimensions
|
||||
- **Any CAD Software**: Simple cube 25mm × 25mm × 25mm
|
||||
- **Use provided file**: Open `Challenge Files/November2025/Cube.3mf` directly
|
||||
|
||||
### Basic Cube Setup
|
||||
|
||||
### Slicer Configuration
|
||||
|
||||
1. **Create or Download Model**:
|
||||
- Use the provided `Challenge Files/November2025/Cube.3mf` file
|
||||
- Or create using any CAD software (25mm × 25mm × 25mm cube)
|
||||
- Or use the Bambu Studio/Orca Slicer primitive steps above
|
||||
|
||||
2. **Slicer Settings** (Critical):
|
||||
- **Dimensions**: 25mm × 25mm × 25mm
|
||||
- **Wall Count/Perimeters**: 2
|
||||
- **Top Layers**: 0
|
||||
- **Bottom Layers**: 3-5 (as needed)
|
||||
- **Infill**: 0%
|
||||
- **Layer Height**: Your choice (hint: smaller = smoother, but slower)
|
||||
|
||||
3. **Tips for Success**:
|
||||
- **Lower layer heights** (0.1mm-0.12mm) help reduce visible lines
|
||||
- **Slower speeds** improve surface quality
|
||||
- **Temperature tuning** is critical for layer adhesion
|
||||
- **Linear advance/pressure advance** can help with consistency
|
||||
- **Proper cooling** prevents warping without sacrificing layer bonding
|
||||
- **Material choice** matters - some filaments naturally produce smoother surfaces
|
||||
|
||||
### Advanced Techniques to Consider
|
||||
|
||||
- **Slicer Tricks**:
|
||||
- Adjust line width for better wall fusion
|
||||
- Experiment with different seam positions
|
||||
- Use variable layer heights if supported
|
||||
- Try different acceleration/jerk settings
|
||||
|
||||
- **Material Selection**:
|
||||
- Experiment with different 3D Fuel filament types
|
||||
- Colors can also give different appearance levels
|
||||
|
||||
### What NOT to Do
|
||||
|
||||
- Do not exceed 2 walls
|
||||
- Do not add a top surface
|
||||
- Do not deviate from 25mm cube dimensions
|
||||
- **No post-processing allowed** (no sanding, heat treatment, chemical smoothing, etc.)
|
||||
|
||||
|
||||
Good luck creating the smoothest cube possible! May your layer lines vanish into nothingness!
|
||||
|
|
@ -1,103 +0,0 @@
|
|||
---
|
||||
gitea: none
|
||||
include_toc: true
|
||||
---
|
||||
|
||||
# October 2025 Challenge: "Is it Glass or Clearly Natural?"
|
||||
|
||||
### Challenge Overview
|
||||
|
||||
Experience the clarity of 3D Fuel's "Clearly Natural" filament in this transparency-focused challenge! Participants will attempt to create the clearest possible print, testing the limits of clear filament printing techniques.
|
||||
|
||||
### Challenge Rules
|
||||
|
||||
#### Materials & Constraints
|
||||
|
||||
- **Filament**: 3D Fuel "Clearly Natural" - Available in two variations:
|
||||
- PCTG (Polyethylene Terephthalate Glycol)
|
||||
- PLA (Polylactic Acid)
|
||||
- **Maximum Filament Usage**: 250g per entry
|
||||
- **Model Specification**: Cylinder - 25mm diameter x 50mm height
|
||||
- **Print Mode**: Vase mode (approximately 6 grams of filament)
|
||||
|
||||
#### Competition Categories
|
||||
|
||||
- **PCTG Division**: For prints using Clearly Natural PCTG
|
||||
- **PLA Division**: For prints using Clearly Natural PLA
|
||||
- **Overall Winner**: Best clarity across both divisions
|
||||
|
||||
#### Judging Criteria
|
||||
|
||||
1. **Clarity & Transparency** (40%): How clear and glass-like is the final print?
|
||||
2. **Print Quality** (30%): Surface finish, layer adhesion, and overall structural integrity
|
||||
3. **Technique Innovation** (20%): Creative printing techniques to maximize transparency
|
||||
4. **Challenge Adherence** (10%): Following material constraints and using supplied model
|
||||
|
||||
#### Submission Requirements
|
||||
|
||||
- **Model Compliance**: Cylinder must measure 25mm diameter x 50mm height
|
||||
- **Vase Mode**: Must be printed in vase mode (single perimeter wall)
|
||||
- **Weight Verification**: Should use approximately 6 grams of filament
|
||||
- **Documentation**: Include photos showing transparency (with light sources)
|
||||
- **Settings Documentation**: Share printer settings used (layer height, temperature, speed, etc.)
|
||||
- **Process Notes**: Brief description of techniques used to achieve clarity
|
||||
|
||||
#### Evaluation Process
|
||||
|
||||
- **Transparency Test**: Prints will be evaluated under controlled lighting conditions
|
||||
- **Comparative Assessment**: Side-by-side comparison with actual glass reference
|
||||
- **Community Voting**: People's choice award for favorite clear print
|
||||
- **Technical Review**: Expert panel assessment of print quality and technique
|
||||
|
||||
### Prizes & Recognition
|
||||
|
||||
#### Awards
|
||||
|
||||
- **PCTG Division Winner**: Recognition + prize
|
||||
- **PLA Division Winner**: Recognition + prize
|
||||
- **Overall "Glass Master" Winner**: Grand prize + recognition
|
||||
- **People's Choice Award**: Community favorite
|
||||
- **Innovation Award**: Most creative clarity technique
|
||||
|
||||
#### Documentation
|
||||
|
||||
- Winner photos for social media sharing
|
||||
- Video documentation of winning techniques
|
||||
- Settings and process sharing for community learning
|
||||
|
||||
### Timeline
|
||||
|
||||
- **Challenge Announcement**: October 1, 2025
|
||||
- **Model Specification Released**: October 13, 2025
|
||||
- **Submission Deadline**: October 28, 2025
|
||||
- **Judging Period**: October 29-30, 2025
|
||||
- **Winner Announcement**: October 31, 2025
|
||||
|
||||
### Creating the Cylinder Model
|
||||
|
||||
#### Using Bambu Studio
|
||||
|
||||
**Step 1: Add Primitive**
|
||||
|
||||
1. Open Bambu Studio to a new project
|
||||
2. Right-click on the build plate
|
||||
3. Select "Add Primitive"
|
||||
4. Select "Cylinder"
|
||||
|
||||
|
||||
|
||||
**Step 2: Resize the Cylinder**
|
||||
|
||||
1. Click to resize the cylinder
|
||||
2. Uncheck "uniform scale" if checked
|
||||
3. Set X and Y to 25mm
|
||||
4. Set Z to 50mm
|
||||
|
||||
|
||||
|
||||
#### Alternative Methods
|
||||
|
||||
- **Fusion 360**: Create cylinder sketch, extrude to 50mm height
|
||||
- **Tinkercad**: Use cylinder shape, adjust dimensions
|
||||
- **FreeCAD**: Create cylinder with specified dimensions
|
||||
- **Any CAD Software**: Simple cylinder 25mm diameter x 50mm height
|
||||
|
|
@ -1,85 +0,0 @@
|
|||
# Challenge Template
|
||||
|
||||
## [Month Year] Challenge: "[Challenge Name]"
|
||||
|
||||
### Challenge Overview
|
||||
|
||||
[Brief description of the challenge theme and goals]
|
||||
|
||||
### Challenge Rules
|
||||
|
||||
#### Materials & Constraints
|
||||
|
||||
- **Filament**: [Specify required filament type/brand]
|
||||
- **Model Specification**: [Dimensions, complexity, or provided model details]
|
||||
- **Print Mode**: [Any specific printing requirements]
|
||||
|
||||
#### Competition Categories
|
||||
|
||||
- **[Category 1]**: [Description]
|
||||
- **[Category 2]**: [Description]
|
||||
- **[Overall Winner]**: [Description]
|
||||
|
||||
#### Judging Criteria
|
||||
|
||||
1. **[Criteria 1]** ([%]): [Description]
|
||||
2. **[Criteria 2]** ([%]): [Description]
|
||||
3. **[Criteria 3]** ([%]): [Description]
|
||||
4. **[Criteria 4]** ([%]): [Description]
|
||||
|
||||
#### Submission Requirements
|
||||
|
||||
- **[Requirement 1]**: [Description]
|
||||
- **[Requirement 2]**: [Description]
|
||||
- **Documentation**: Include photos showing [specific aspects]
|
||||
- **Settings Documentation**: Share printer settings used
|
||||
- **Process Notes**: Brief description of techniques used
|
||||
|
||||
#### Evaluation Process
|
||||
|
||||
- **[Evaluation Method 1]**: [Description]
|
||||
- **[Evaluation Method 2]**: [Description]
|
||||
- **Community Voting**: [Description]
|
||||
- **Technical Review**: [Description]
|
||||
|
||||
### Prizes & Recognition
|
||||
|
||||
#### Awards
|
||||
|
||||
- Determined at each competition.
|
||||
|
||||
#### Documentation
|
||||
|
||||
- Winner photos for social media sharing
|
||||
- Video documentation of winning techniques
|
||||
- Settings and process sharing for community learning
|
||||
|
||||
### Timeline
|
||||
|
||||
- **Challenge Announcement**: [Date]
|
||||
- **Submission Deadline**: [Date](Next Meetup)
|
||||
- **Judging Period**: During Next Meetup
|
||||
- **Winner Announcement**: At Following Meetup
|
||||
|
||||
### [Model Creation/Setup Instructions]
|
||||
|
||||
#### [Software/Method 1]
|
||||
|
||||
**Step 1: [Action]**
|
||||
|
||||
1. [Instruction]
|
||||
2. [Instruction]
|
||||
3. [Instruction]
|
||||
|
||||
**Step 2: [Action]**
|
||||
|
||||
1. [Instruction]
|
||||
2. [Instruction]
|
||||
3. [Instruction]
|
||||
|
||||
#### Alternative Methods
|
||||
|
||||
- **[Software 1]**: [Brief instructions]
|
||||
- **[Software 2]**: [Brief instructions]
|
||||
- **[Software 3]**: [Brief instructions]
|
||||
- **Any CAD Software**: [General guidance]
|
||||
50
ideas.md
50
ideas.md
|
|
@ -1,50 +0,0 @@
|
|||
---
|
||||
gitea: none
|
||||
include_toc: true
|
||||
---
|
||||
|
||||
# 3D Print Meetup Ideas & Planning
|
||||
|
||||
## 🏆 Competition Format: "Sliced" Design Challenge *(Sticky Note 1)*
|
||||
|
||||
> Inspired by "Chopped" TV show format
|
||||
|
||||
- **Concept**: Head-to-head design competition with surprise challenges
|
||||
- **Community Outreach** *(Sticky Note 1)*:
|
||||
- Reach out to local schools and robotics teams for participation
|
||||
- Coordinate with Lynn Fritz regarding scheduling and involvement
|
||||
- **Format**: Timed design challenges with specific constraints or materials
|
||||
|
||||
## 📋 Event Structure & Categories
|
||||
|
||||
### Show & Tell Segments *(Sticky Note 2)*
|
||||
|
||||
- **Multiple Categories**: Organize different sections with specific themes
|
||||
- **Recognition**: Prizes for each category winner
|
||||
- **Documentation**: Take photos of winners to share to social media
|
||||
- **Video Documentation**: Record videos of winners for social media sharing
|
||||
- **Hybrid Format**: Combine show & tell with competitive elements
|
||||
- **Event Recap**: *(Note: This was crossed out in original sticky note - may need further discussion)*
|
||||
|
||||
### Prize Structure
|
||||
|
||||
- Individual category winners
|
||||
- Overall competition winner
|
||||
- People's choice award
|
||||
|
||||
## 🗓️ Monthly Challenges & Community Engagement
|
||||
|
||||
### Challenge Selection Process *(Sticky Note 3)*
|
||||
|
||||
- **Monthly Themes**: Set up rotating monthly design challenges
|
||||
- **Community Input**:
|
||||
- Create ballot/survey system for challenge suggestions
|
||||
- Integrate Discord and partner schools for voting
|
||||
- **Integration**: Coordinate with Downslash platform for submissions
|
||||
|
||||
### Voting & Participation *(Sticky Note 3)*
|
||||
|
||||
- Discord community polls
|
||||
- School partnership voting
|
||||
- Public showcase events
|
||||
- Integration between Discord and school communities
|
||||
103
itinerary.md
103
itinerary.md
|
|
@ -1,103 +0,0 @@
|
|||
---
|
||||
gitea: none
|
||||
include_toc: true
|
||||
---
|
||||
|
||||
# 3D Print Meetup Schedule
|
||||
|
||||
## 📅 Meeting Format & Timeline
|
||||
|
||||
**Meeting Duration**: 2 Hours (6:00 PM - 8:00 PM)
|
||||
|
||||
### 🕕 6:00 PM - 6:15 PM: Arrival & Social Time
|
||||
|
||||
**Duration: 15 minutes**
|
||||
|
||||
- Welcome new members and returning participants
|
||||
- Informal networking and conversation
|
||||
- Setup and equipment check
|
||||
- Coffee/refreshments (if available)
|
||||
|
||||
### 🕕 6:15 PM - 6:45 PM: Industry News & Updates
|
||||
|
||||
**Duration: 30 minutes**
|
||||
**Presenter: John**
|
||||
|
||||
- Latest 3D printing industry developments
|
||||
- New technology announcements and trends
|
||||
- 3D Fuel product updates and releases
|
||||
- Market insights and innovations
|
||||
- Q&A session for industry-related questions
|
||||
|
||||
### 🕕 6:45 PM - 7:15 PM: Show & Tell
|
||||
|
||||
**Duration: 15-30 minutes**
|
||||
|
||||
- Community member project presentations
|
||||
- Recent prints and creations showcase
|
||||
- **Challenge judging** (when entries from previous month's challenge are present)
|
||||
- Problem-solving discussions
|
||||
- Technique sharing and tips
|
||||
- Challenge submissions and updates
|
||||
- Quick project demos
|
||||
|
||||
### 🕖 7:15 PM - 7:45 PM: Featured Presentation
|
||||
|
||||
**Duration: 30 minutes**
|
||||
|
||||
- In-depth technical presentations
|
||||
- Guest speaker sessions
|
||||
- Workshop demonstrations
|
||||
- Challenge announcements and explanations
|
||||
- Advanced technique tutorials
|
||||
- Interactive learning sessions
|
||||
|
||||
### 🕗 7:45 PM - 8:00 PM: Closing & General Discussion
|
||||
|
||||
**Duration: 15 minutes**
|
||||
|
||||
- Meeting wrap-up and summary
|
||||
- Upcoming events and announcements
|
||||
- Informal discussion and final questions
|
||||
- Networking and contact exchange
|
||||
- Cleanup and departure preparation
|
||||
|
||||
## 📋 Meeting Guidelines
|
||||
|
||||
### Participation Tips
|
||||
|
||||
- **Arrive Early**: Come at 6:00 PM to maximize networking time
|
||||
- **Bring Projects**: Always welcome to share your latest prints
|
||||
- **Ask Questions**: Industry news segment is perfect for Q&A
|
||||
- **Stay Engaged**: Interactive participation encouraged throughout
|
||||
|
||||
### Presentation Guidelines
|
||||
|
||||
- **Show & Tell**: 3-5 minutes per person maximum
|
||||
- **Challenge Entries**: Bring previous month's challenge submissions for group judging
|
||||
- **Featured Presentations**: Coordinate with organizers in advance
|
||||
- **Materials**: Bring physical prints when possible
|
||||
- **Documentation**: Photos welcome for social media sharing
|
||||
|
||||
### Meeting Etiquette
|
||||
|
||||
- Respect time limits for each segment
|
||||
- Allow everyone opportunity to participate
|
||||
- Keep discussions relevant to 3D printing
|
||||
- Help with setup and cleanup as needed
|
||||
|
||||
## 🗓️ Schedule Flexibility
|
||||
|
||||
**Note**: Timing may adjust based on:
|
||||
|
||||
- Number of show & tell participants
|
||||
- Challenge entries requiring judging from previous month
|
||||
- Complexity of featured presentation
|
||||
- Special events or challenges
|
||||
- Community engagement levels
|
||||
|
||||
**Typical Variations**:
|
||||
|
||||
- Show & Tell: 15-30 minutes (depending on participation and challenge judging)
|
||||
- Featured Presentation: 30 minutes (fixed duration)
|
||||
- Buffer time built into closing segment for overruns
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 648 KiB |
|
|
@ -1,77 +0,0 @@
|
|||
# Current Challenge: October 2025
|
||||
|
||||
## "Is it Glass or Clearly Natural?"
|
||||
|
||||
Experience the clarity of 3D Fuel's "Clearly Natural" filament in this transparency-focused challenge! Participants will attempt to create the clearest possible print, testing the limits of clear filament printing techniques.
|
||||
|
||||
## Challenge Details
|
||||
|
||||
### Materials & Constraints
|
||||
- **Filament**: 3D Fuel "Clearly Natural" - Available in two variations:
|
||||
- PCTG (Polyethylene Terephthalate Glycol)
|
||||
- PLA (Polylactic Acid)
|
||||
- **Maximum Filament Usage**: 250g per entry
|
||||
- **Model Specification**: Cylinder - 25mm diameter x 50mm height
|
||||
- **Print Mode**: Vase mode (approximately 6 grams of filament)
|
||||
|
||||
### Competition Categories
|
||||
- **PCTG Division**: For prints using Clearly Natural PCTG
|
||||
- **PLA Division**: For prints using Clearly Natural PLA
|
||||
- **Overall Winner**: Best clarity across both divisions
|
||||
|
||||
### Judging Criteria
|
||||
1. **Clarity & Transparency** (40%): How clear and glass-like is the final print?
|
||||
2. **Print Quality** (30%): Surface finish, layer adhesion, and overall structural integrity
|
||||
3. **Technique Innovation** (20%): Creative printing techniques to maximize transparency
|
||||
4. **Challenge Adherence** (10%): Following material constraints and using supplied model
|
||||
|
||||
### Submission Requirements
|
||||
- **Model Compliance**: Cylinder must measure 25mm diameter x 50mm height
|
||||
- **Vase Mode**: Must be printed in vase mode (single perimeter wall)
|
||||
- **Weight Verification**: Should use approximately 6 grams of filament
|
||||
- **Documentation**: Include photos showing transparency (with light sources)
|
||||
- **Settings Documentation**: Share printer settings used (layer height, temperature, speed, etc.)
|
||||
- **Process Notes**: Brief description of techniques used to achieve clarity
|
||||
|
||||
## Timeline
|
||||
- **Challenge Announcement**: October 1, 2025
|
||||
- **Model Specification Released**: October 13, 2025
|
||||
- **Submission Deadline**: October 28, 2025
|
||||
- **Judging Period**: October 29-30, 2025
|
||||
- **Winner Announcement**: October 31, 2025
|
||||
|
||||
## Creating the Cylinder Model
|
||||
|
||||
### Using Bambu Studio
|
||||
|
||||
**Step 1: Add Primitive**
|
||||
1. Open Bambu Studio to a new project
|
||||
2. Right-click on the build plate
|
||||
3. Select "Add Primitive"
|
||||
4. Select "Cylinder"
|
||||
|
||||
**Step 2: Resize the Cylinder**
|
||||
1. Click to resize the cylinder
|
||||
2. Uncheck "uniform scale" if checked
|
||||
3. Set X and Y to 25mm
|
||||
4. Set Z to 50mm
|
||||
|
||||
### Alternative Methods
|
||||
- **Fusion 360**: Create cylinder sketch, extrude to 50mm height
|
||||
- **Tinkercad**: Use cylinder shape, adjust dimensions
|
||||
- **FreeCAD**: Create cylinder with specified dimensions
|
||||
- **Any CAD Software**: Simple cylinder 25mm diameter x 50mm height
|
||||
|
||||
## Awards & Recognition
|
||||
|
||||
### Awards
|
||||
- **PCTG Division Winner**: Recognition + prize
|
||||
- **PLA Division Winner**: Recognition + prize
|
||||
- **Overall "Glass Master" Winner**: Grand prize + recognition
|
||||
- **People's Choice Award**: Community favorite
|
||||
- **Innovation Award**: Most creative clarity technique
|
||||
|
||||
### Documentation
|
||||
- Winner photos for social media sharing
|
||||
- Video documentation of winning techniques
|
||||
- Settings and process sharing for community learning
|
||||
|
|
@ -1,36 +0,0 @@
|
|||
# 3D Print Meetup Wiki
|
||||
|
||||
Welcome to the official wiki for our monthly 3D printing meetup! This wiki contains comprehensive information about our community, meetings, challenges, and resources.
|
||||
|
||||
## Quick Navigation
|
||||
|
||||
### Meeting Information
|
||||
- **[Meeting Itinerary](Itinerary)** - Complete meeting schedule and format
|
||||
- **[Important Dates](Important-Dates)** - Upcoming meeting dates and schedule changes
|
||||
|
||||
### Challenges
|
||||
- **[Current Challenge](Current-Challenge)** - October 2025: "Is it Glass or Clearly Natural?"
|
||||
- **[Challenge Archive](Challenge-Archive)** - Past and upcoming challenges
|
||||
- **[How to Participate](Challenge-Participation)** - Guide for joining challenges
|
||||
|
||||
### Community
|
||||
- **[Getting Started](Getting-Started)** - New member guide
|
||||
- **[Ideas and Planning](Ideas-and-Planning)** - Future concepts and community input
|
||||
|
||||
## About Our Meetup
|
||||
|
||||
Our monthly 3D printing meetup brings together enthusiasts, makers, and innovators to share knowledge, showcase projects, and explore the latest in additive manufacturing technology.
|
||||
|
||||
### Meeting Format
|
||||
- **Duration**: 2 hours (6:00 PM - 8:00 PM)
|
||||
- **Structure**: Social time, industry updates, show & tell, presentations
|
||||
- **Community Focus**: Learning, sharing, and networking
|
||||
|
||||
### Next Meetings
|
||||
- **November 12th, 2025** (Note: NOT the usual 3rd Wednesday)
|
||||
- **December 10th, 2025** (Note: NOT the usual 3rd Wednesday)
|
||||
- **Regular 3rd Wednesday schedule resumes after New Year**
|
||||
|
||||
---
|
||||
|
||||
*Last updated: October 16, 2025*
|
||||
|
|
@ -1,94 +0,0 @@
|
|||
---
|
||||
gitea: none
|
||||
tags:
|
||||
- hidden
|
||||
---
|
||||
# Ideas and Planning
|
||||
|
||||
## Future Event Concepts
|
||||
|
||||
### "Sliced" Design Challenge Format
|
||||
*Inspired by "Chopped" TV show format*
|
||||
|
||||
**Concept**: Head-to-head design competition with surprise challenges
|
||||
- **Format**: Timed design challenges with specific constraints or materials
|
||||
- **Community Engagement**: Head-to-head competitions create excitement
|
||||
- **Skill Development**: Challenges participants to think creatively under pressure
|
||||
|
||||
### Community Outreach Initiatives
|
||||
|
||||
#### School Partnerships
|
||||
- **Target**: Local schools and robotics teams for participation
|
||||
- **Coordination**: Work with Lynn Fritz regarding scheduling and involvement
|
||||
- **Educational Value**: Introduce students to advanced 3D printing techniques
|
||||
- **Pipeline**: Create pathway from education to community involvement
|
||||
|
||||
#### Discord Integration
|
||||
- **Community Input**: Create ballot/survey system for challenge suggestions
|
||||
- **Voting Platform**: Integrate Discord and partner schools for voting
|
||||
- **Ongoing Engagement**: Maintain community connection between meetings
|
||||
|
||||
## Event Structure Improvements
|
||||
|
||||
### Enhanced Show & Tell Format
|
||||
- **Multiple Categories**: Organize different sections with specific themes
|
||||
- **Recognition System**: Prizes for each category winner
|
||||
- **Documentation Strategy**:
|
||||
- Take photos of winners to share on social media
|
||||
- Record videos of winners for social media sharing
|
||||
- **Hybrid Format**: Combine show & tell with competitive elements
|
||||
|
||||
### Prize Structure Evolution
|
||||
- **Individual Category Winners**: Recognition for specific achievements
|
||||
- **Overall Competition Winner**: Grand prize for best submission
|
||||
- **People's Choice Award**: Community voting component
|
||||
|
||||
## Monthly Challenge Development
|
||||
|
||||
### Challenge Selection Process
|
||||
- **Monthly Themes**: Set up rotating monthly design challenges
|
||||
- **Community Input Process**:
|
||||
- Create ballot/survey system for challenge suggestions
|
||||
- Integrate Discord and partner schools for voting
|
||||
- Collect feedback during meetings
|
||||
|
||||
### Platform Integration
|
||||
- **Downslash Integration**: Coordinate with Downslash platform for submissions
|
||||
- **Cross-Platform Voting**: Enable voting across Discord and school communities
|
||||
- **Documentation Sharing**: Streamline submission and sharing processes
|
||||
|
||||
## Implementation Timeline
|
||||
|
||||
### Short-Term Goals (Next 3 months)
|
||||
- Complete October transparency challenge
|
||||
- Develop November challenge theme
|
||||
- Establish school partnership contacts
|
||||
|
||||
### Medium-Term Goals (3-6 months)
|
||||
- Launch "Sliced" format pilot challenge
|
||||
- Implement Discord voting system
|
||||
- Expand community outreach
|
||||
|
||||
### Long-Term Vision (6+ months)
|
||||
- Regular competitive events
|
||||
- Strong school partnerships
|
||||
- Multi-platform community engagement
|
||||
|
||||
## Community Feedback Integration
|
||||
|
||||
### Input Channels
|
||||
- **Meeting Discussions**: Collect ideas during meetups
|
||||
- **Discord Polls**: Online community voting
|
||||
- **School Feedback**: Educational partner input
|
||||
- **Organizer Coordination**: Regular planning sessions
|
||||
|
||||
### Idea Development Process
|
||||
1. **Collection**: Gather community suggestions
|
||||
2. **Evaluation**: Assess feasibility and interest
|
||||
3. **Planning**: Develop implementation strategy
|
||||
4. **Testing**: Pilot new concepts
|
||||
5. **Refinement**: Improve based on feedback
|
||||
|
||||
---
|
||||
|
||||
*This document represents ongoing planning discussions and community input. Ideas are subject to refinement and community approval.*
|
||||
|
|
@ -1,51 +0,0 @@
|
|||
# Important Dates
|
||||
|
||||
## Upcoming Meetup Schedule Changes
|
||||
|
||||
### Special Notice: November & December 2025
|
||||
|
||||
**IMPORTANT**: The next two meetups will NOT be on the usual 3rd Wednesday:
|
||||
|
||||
- **November Meetup: November 12th, 2025**
|
||||
- **December Meetup: December 10th, 2025**
|
||||
|
||||
**We will resume normal 3rd Wednesday schedule after the New Year.**
|
||||
|
||||
## Regular Meeting Schedule
|
||||
|
||||
### Standard Schedule (Resumes January 2026)
|
||||
- **When**: 3rd Wednesday of each month
|
||||
- **Time**: 6:00 PM - 8:00 PM
|
||||
- **Duration**: 2 hours
|
||||
|
||||
### Meeting Format
|
||||
- **6:00-6:15 PM**: Arrival & Social Time
|
||||
- **6:15-6:45 PM**: Industry News & Updates (John)
|
||||
- **6:45-7:15 PM**: Show & Tell (includes challenge judging)
|
||||
- **7:15-7:45 PM**: Featured Presentation
|
||||
- **7:45-8:00 PM**: Closing & General Discussion
|
||||
|
||||
## Challenge Timeline
|
||||
|
||||
### October 2025: "Is it Glass or Clearly Natural?"
|
||||
- **Challenge Announcement**: October 1, 2025
|
||||
- **Model Specification Released**: October 13, 2025
|
||||
- **Submission Deadline**: October 28, 2025
|
||||
- **Judging Period**: October 29-30, 2025
|
||||
- **Winner Announcement**: October 31, 2025
|
||||
|
||||
### November 2025: [Challenge TBD]
|
||||
- **Announcement**: November 12th meetup
|
||||
- **Details**: To be determined
|
||||
|
||||
## Meeting Locations
|
||||
|
||||
*[Location information to be added]*
|
||||
|
||||
## Contact Information
|
||||
|
||||
*[Contact details to be added]*
|
||||
|
||||
---
|
||||
|
||||
*Last updated: October 16, 2025*
|
||||
|
|
@ -1,90 +0,0 @@
|
|||
# Meeting Itinerary
|
||||
|
||||
## Meeting Format & Timeline
|
||||
|
||||
**Meeting Duration**: 2 Hours (6:00 PM - 8:00 PM)
|
||||
|
||||
## Schedule Breakdown
|
||||
|
||||
### 6:00 PM - 6:15 PM: Arrival & Social Time
|
||||
**Duration: 15 minutes**
|
||||
|
||||
- Welcome new members and returning participants
|
||||
- Informal networking and conversation
|
||||
- Setup and equipment check
|
||||
- Coffee/refreshments (if available)
|
||||
|
||||
### 6:15 PM - 6:45 PM: Industry News & Updates
|
||||
**Duration: 30 minutes**
|
||||
**Presenter: John**
|
||||
|
||||
- Latest 3D printing industry developments
|
||||
- New technology announcements and trends
|
||||
- 3D Fuel product updates and releases
|
||||
- Market insights and innovations
|
||||
- Q&A session for industry-related questions
|
||||
|
||||
### 6:45 PM - 7:15 PM: Show & Tell
|
||||
**Duration: 15-30 minutes**
|
||||
|
||||
- Community member project presentations
|
||||
- Recent prints and creations showcase
|
||||
- **Challenge judging** (when entries from previous month's challenge are present)
|
||||
- Problem-solving discussions
|
||||
- Technique sharing and tips
|
||||
- Challenge submissions and updates
|
||||
- Quick project demos
|
||||
|
||||
### 7:15 PM - 7:45 PM: Featured Presentation
|
||||
**Duration: 30 minutes**
|
||||
|
||||
- In-depth technical presentations
|
||||
- Guest speaker sessions
|
||||
- Workshop demonstrations
|
||||
- Challenge announcements and explanations
|
||||
- Advanced technique tutorials
|
||||
- Interactive learning sessions
|
||||
|
||||
### 7:45 PM - 8:00 PM: Closing & General Discussion
|
||||
**Duration: 15 minutes**
|
||||
|
||||
- Meeting wrap-up and summary
|
||||
- Upcoming events and announcements
|
||||
- Informal discussion and final questions
|
||||
- Networking and contact exchange
|
||||
- Cleanup and departure preparation
|
||||
|
||||
## Meeting Guidelines
|
||||
|
||||
### Participation Tips
|
||||
- **Arrive Early**: Come at 6:00 PM to maximize networking time
|
||||
- **Bring Projects**: Always welcome to share your latest prints
|
||||
- **Ask Questions**: Industry news segment is perfect for Q&A
|
||||
- **Stay Engaged**: Interactive participation encouraged throughout
|
||||
|
||||
### Presentation Guidelines
|
||||
- **Show & Tell**: 3-5 minutes per person maximum
|
||||
- **Challenge Entries**: Bring previous month's challenge submissions for group judging
|
||||
- **Featured Presentations**: Coordinate with organizers in advance
|
||||
- **Materials**: Bring physical prints when possible
|
||||
- **Documentation**: Photos welcome for social media sharing
|
||||
|
||||
### Meeting Etiquette
|
||||
- Respect time limits for each segment
|
||||
- Allow everyone opportunity to participate
|
||||
- Keep discussions relevant to 3D printing
|
||||
- Help with setup and cleanup as needed
|
||||
|
||||
## Schedule Flexibility
|
||||
|
||||
**Note**: Timing may adjust based on:
|
||||
- Number of show & tell participants
|
||||
- Challenge entries requiring judging from previous month
|
||||
- Complexity of featured presentation
|
||||
- Special events or challenges
|
||||
- Community engagement levels
|
||||
|
||||
**Typical Variations**:
|
||||
- Show & Tell: 15-30 minutes (depending on participation and challenge judging)
|
||||
- Featured Presentation: 30 minutes (fixed duration)
|
||||
- Buffer time built into closing segment for overruns
|
||||
Loading…
Reference in New Issue